Are you getting annoying barking noise while putting breaks? No doubt it hits your ear, but it also alerts the driver about the upcoming danger. But how to be safe by checking the potential causes of braking noises-
Common Break Noises and the Reason They Happen-
Whether you’re or not familiar with how the car suppose to sound, here is a brief checklist of how the vehicle may sound according to the instructors from our the driving school in Melbourne.
Grinding: It is the sound that indicates you to stop driving. It is caused by the brake pad being worn down.
Thumping from the rear: It is continuous beating sound to the rear part of the car. It usually comes from the rear drums.
Squeaking: It is caused due to cheap brake pads, or it may happen that the brake wear indicator is hitting the rotor.
Squealing: The rotor rusting may happen if the car is parked outdoors for a long time.
Scraping: It may happen that you have picked up a rock in the breaks.
Grinding noise while applying the break: You can say it as alarming call if you can hear it when applying the brakes. It almost sounds like hitting a rumble strip on the edge of the highway. So, why does it happen? It is caused by a lack of brake pad material, and both the rotors and pads are left with the metal nor sufficient for braking. Before you take it for a fix, put a pause on driving.
Thumping from the rear: Break drums or rotors get resurfaced once a while. The cutting bit on the brake lathe removes the old braking surfacer giving it a polished matt finish. During this process, the cutting bit can create a groove in the brake drum. And, if the groove gets interrupted, the brake shoes snap back the backing plate.
If you search online asking “driving school Melbourne near me” we recommend fixing this issue by driving your car in the open area with less or no traffic at the speed of 40 miles/hour. Lightly pull up on the emergency brake handle while holding the release button, this makes sure that the brake handle won’t lock in the braking position. However, hold the emergency brake for about 3 secons to prevent the overheating of the drums.
Squeaking: Mostly, the brake squeaking noise happens due to using the inferior pads. Though a cheap brake fixing job is quite attractive, it can have cheap metal flakes in the brake material.
Squealing: The reason why most brake pads cause squealing noise due to the lack of lubrication on the calliper-to-pad contact points.
Scraping: Apart from the stuck debris in the brakes, the saggy wheel bearing, twisted brake shield, worn-out components can cause this noise. As a quick fix, you can drive the car at the reverse direction, gently pressing the foot on the brake pedal. Release the brake and repeat the same, until you get things done.
Being one of the best driving schools in Melbourne, we provide education to the driver about the different parts of the car as well as a braking system to diagnose the related issues.